ELAC Miracord 50 Drive System: Belt drive
Motor: DC motor
Speeds: 33 1/3 and 45
Servo: Speed rotation and servo system
Rotation Speed: Variation of ±1%
Wow and Flutter: 0.1%
Signal to Noise Rate: A-Weighted: -67 dB or higher Unweighted: -60 dB or higher
Turntable Platter: Material: Aluminum die-cast Diameter: 11.8" / 300 mm
Tonearm
Type: Aluminum tube, static-balanced
Effective Arm Length: 8.8" / 223.6 mm
Stylus Pressure Adjustment: Range: 0 to 4 g
Cartridge Weight: Range: 3.5 to 6 g
Overhang: 18.6 mm
Offset Angle: 25°
Bearing: Stainless steel
Cartridge
Type: Audio-Technica AT91 moving magnet
Stylus: Bonded diamond
Mount: Half-inch
Frequency Response: 20 Hz to 20 kHz
Channel Separation: >18 dB
Channel Balance: 2.5 dB
Vertical Tracking Angle: 20°
Stylus Pressure Adjustment: 2 g ± 0.5 g
Cartridge Weight: 5 g ± 0.5 g
Headshell: Weight: 11 g (including screws, nuts, and wires)
Preamplifier
Type: Moving Magnet (MM)
Phono Output Level: 2.5 mV (1 kHz, 3.54 cm/s)
Line Output: 140 mV (-17 dBV)
Switch: Phono and Line
Load Impedance: 47 kOhms
Connector: RCA
Voltage: 100 to 240 VAC / 50 to 60 Hz
Power Consumption: 1.5 W (less than 0.5 W at standby)
Dimensions: 5.5 x 16.1 x 14.2" / 14.0 x 40.8 x 36.1 cm
Weight: 12.1 lb / 5.5 kg
Package Weight: 15.7 lb
Box Dimensions (LxWxH): 19.9 x 16.8 x 15.63"