Monitor Audio HI FI installation speakers CINERGY 100

THX Certification
THX® Certified Ultra

System Format
3 Way

Sensitivity (2.83 Vrms @ 1 M)
89 dB

Maximum Linear SPL**** (@1m, free space)
Continuous 103 dB, Peak 116 dB

Power Handling (R.M.S)
Continuous 200 W, Peak* 800 W

Nominal Impedance
4 Ohms

Minimum Impedance (20 Hz - 20 kHz)
3.8 Ohms

Recommended Low Frequency Crossover Frequency
80 - 100 Hz (High Pass)

Recommended Amp Requirements (R.M.S)
100 - 800 W (IA750-2 or IA750-4)

Bass Alignment
Ported**

Port Tuning Frequency
67 Hz**

LF Extension, In Wall, With Port Bungs (- 6dB)
48 Hz

LF Extension, In Free Space, No Port Bungs (- 6dB)
65 Hz

HF Extension (-6dB)
>30 kHz

Drive Unit Complement
1 x 8" RDT Driver
1 x 2.5" C-CAM Driver
1 x MPD Transducer

External Dimensions (Cabinet Only) (H x W x D)
460 x 350 x 160 mm (181/8 x 133/4 x 65/16")

External Dimensions (Inc Grille) (H x W x D)
460 x 350 x 174.1 mm (181/8 x 133/4 x 67/8")

Max External Dimensions (Inc all Fittings) (H x W x D)
460 x 350 x 174.1 mm (181/8 x 133/4 x 67/8")

Product Weight
18.4 kg (40 lb 8 oz)

Conditions
* Calculated from a peak voltage, this is not a true power figure but useful for comparisons.

** When used in an In-Wall or On-Wall configuration it is recommended to use the fitted port bungs to control bass output. This will effectively make the product a sealed box.

*** Band limited with Low pass at 200 Hz, should only be used with IA800-2C and the correct speaker profile.

**** Tested with a music like noise signal with distortion and power compression remaining below audible limits.

THX
THX® Certified Loudspeakers.

THX® and the THX® Logo are the property of THX® Ltd., registered in the U.S. and other countries.