• 50W x 2 Continuous Power into 8 or 4 Ohms
• 90W / 150W / 200W IHF Dynamic Power into 8 / 4 / 2 Ohms
• First hi-fi amplifier to feature Chromecast built-in
• Integrated Bluetooth^® for added music streaming flexibility
• Built-in Phono Preamp for Turntables
• Stereo Line, Optical Digital and Coax Digital inputs
• NAD Remote App support for tablet and smartphone
• Dedicated Headphone Amplifier
• Subwoofer Output

Line In, Subwoofer Out

• THD (20Hz-20kHz)
• <0.005% at 2V out
• Signal/Noise Ratio
• >106dB (IHF; A-weighted, 500mV out, unity gain)
• Input Impedance (R and C)
• 56 kilohm + 100pF
• Maximum Input Signal
• >4.5Vrms (ref. 0.1% THD)
• Output Impedance
• Source Z + 200 Ohm
• Input Sensitivity
• 50mV (100Hz ref. 500mV out, Volume maximum
• Maximum voltage output – IHF load
• >4.5V (ref. 0.1% THD)

Line In, Headphone Out

• THD (20Hz-20kHz)
• <0.005% at 1V out
• Signal/Noise Ratio
• >105dB (IHF; A-weighted, 32 Ohm loads, ref. 2V out, unity gain)
• Frequency Response
• ±0.3dB (20Hz-20kHz)
• Channel Separation
• >56dB at 1kHz
• Output Impedance
• 0.5 Ohm

Line In, Speaker Out

• Continuous Output Power into 4 Ohms and 8 Ohms (Stereo)
• >50W (at rated THD, 20-20kHz, both channels driven)
• IHF Dynamic Power
• 8 Ohm 80W
  4 Ohm 150W
  2 Ohm 210W
• THD (20Hz-20kHz)
• <0.03% (250mW to 50W, 8 Ohm and 4 Ohm
• Signal/Noise Ratio
• >98dB (A-weighted, 500mV input ref. 1W out in 8 Ohm)
• Clipping power
• >60W (at 1kHz 0.1% THD)
• Peak output current
• >18A (in 1 Ohm, 1 ms)
• Damping Factor
• >300 (ref. 8 Ohm, 20Hz to 6.5kHz)
• Frequency Response
• ±0.3 dB (20Hz-20kHz)
• Channel Separation
• 1kHz >75dB
  10kHz >65dB
• Input Sensitivity (For 50W in 8 Ohm)
• Line In: 380mV, Digital In: 18% FS
• Sample Rate
• Up to 24 bit/192kHz

Phono In, Speaker Out

• THD (20Hz-20kHz) (Stereo)
• <0.3% at 50W out
• Signal/Noise Ratio
• >82dB (200 Ohm source, A-weighted, ref. 500mV out)
  >76dB (MM cartridge source, IHF A-weighted, ref. 500mV out)
• Input Sensitivity
• 4.1mV (ref. 50W 1kHz 4 Ohm out, Volume maximum)
• Frequency Response
• ±0.3dB (20Hz-20kHz)
• Input Impedance
• 47 kilohm + 100pF
• Maximum Input Signal
• >80mVrms (ref. 0.1% THD)

• at ECO Standby mode
• 0.4 Watts*
• at Control Standby mode
• 1.8 Watts**
• OFF mode (Power switched OFF)
• 0 Watts

* – After 20 minutes of no user interface interaction and no active source input
** – With established wireless Bluetooth connectivity and 20 minutes of no user interface interaction and no active source input

NOTE: Bluetooth connectivity can be enabled or disabled via press and hold of PLAY button of AMP 3 remote control

• Gross Dimensions (W x H x D)*
• 435 x 70 x 285mm (17 1/8 x 2 13/16 x 11 1/4)”
• Net Weight
• 4.85kg (10.7lb)
• Shipping Weight
• 5.85kg (12.9lb)

^{*Gross dimensions include feet, extended buttons and rear panel terminals}