Ortofon
Ortofon Quintet, Mono MOVING COIL CARTRIDGES
Ortofon Quintet, Mono MOVING COIL CARTRIDGES
📞 Jauta par Ortofon Quintet, Mono MOVING COIL CARTRIDGES esamību pirms pasūtījumā veikšanas
📞 Ask about the Ortofon Quintet, Mono MOVING COIL CARTRIDGES availability before placing an order
📞 Спрашивайте о наличии Ortofon Quintet, Mono MOVING COIL CARTRIDGES перед оформлением заказа
📞 Premium HIFI contacts
📞 Premium HIFI contacts
📞+37129541259
📨 arkadijs.zenins@outlook.com
🔊 Demo Room: Augusta Dombrovska 13-34, Riga (call before visiting)
📺: https://www.youtube.com/c/PremiumHIFIchannel
📺: https://www.tiktok.com/@premiumhifi
SIA ZenCommerce
Reg. nr. 40203439341
Shipping Terms
Shipping Terms
- Shipping method: Standard
Shipment cost: - EU 20€
- LT, EST 5€
- LV 2€
- RU, USA 200€
- Other countries 200€
- Dispatched usually 2 - 5 business days after order placement
- Some times, dispatched up to 20 business days, we will inform additional, after order placement.
Ortofon Quintet, Mono Nude, Elliptical Diamond - True mono MOVING COIL CARTRIDGES Output voltage at 1 kHz 5 cm/sec - 0.3 mV
Frequency response 20 Hz - 20 kHz - +/-2.0 dB
Tracking ability at 315 Hz at recommended tracking force *) - 70 μm
Compliance, dynamic, lateral - 15 μm/mN
Stylus type - Nude Elliptical
Stylus tip radius - r/R 8/18 μm
Tracking force range - 2.1-2.5 g (21-25 mN)
Tracking force recommended - 2.3 g (23 mN)
Tracking angle - 20º
Internal impedance, DC resistance - 5 Ohm
Recommended load impedance - >20 Ohm
Cartridge body material - ABS/Aluminium
Coil wire material - Pure 4-nines silver/Ag
Cartridge colour - White
Cartridge weight - 9 g
*) Typical value
Compatibility with Rega brand TT/TA:
REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge. Please read about cartridge set-up and alignment on tonearm on our FAQ.
Adjusting the height of your Rega tonearm is easy with Acoustic Signature's Spacer Set. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play.
2 - 3 mm spacers should be enough for Quintet cartridge.
Download the MC Quintet series userguide
Share
PremiumHIFI contacts
📞+37129541259
📨 arkadijs.zenins@outlook.com
🔊 Demo Room: Augusta Dombrovska 13-34, Riga (call before visiting)
📺: https://www.youtube.com/c/PremiumHIFIchannel
📺: https://www.tiktok.com/@premiumhifi
SIA ZenCommerce
Reg. nr. 40203439341